You have damp in your home and don't know where it's coming from. Your plumber looks at the problem but can't tell you for sure where the cause is.
And now? Will you break the wall? Will you rip up the tiles? And what if the leak isn't there after all?
The problem isn't only how much you'll pay to find the leak. It's how much you may pay if you start repairing something that isn't at fault.
How much can a wrong diagnosis cost you?
Opening up the wrong spot can mean extra labour, materials and making good. Then come the dust, the tradespeople and the days when your home becomes a building site. Who pays for each part depends on your agreement with the contractor, so settle that before work starts.
There is also a cost you may never realise was unnecessary. Replace a long section of pipe that includes the damaged part, and the leak may stop. That alone does not prove the whole section needed replacing.
Nor does it mean every major repair is a mistake. Some faults and worn-out pipework do call for extensive work. What matters is that the decision is supported by the findings.
The damp is here. The cause may be elsewhere.
Before the stain on the wall becomes the obvious place to break into, the path of the water needs investigating. Water can travel through materials, along joints or beside pipes, and appear some distance from its source.
That is why the investigation goes beyond asking where it is wet. It looks at when the signs appear, which systems are in use at the time, and what evidence connects the damp to a possible cause.
Is owning a thermal camera enough?
“I have a thermal camera.”
“I have a camera on my phone. Does that make me a photographer?”
Would you pay a professional photographer for your wedding and sleep soundly if they turned up with just their phone? A wedding happens once. So does the hole in the wall: if it's opened in the wrong spot, there's no going back.
To decide where work is needed, you want to know what the image means. A thermal camera is a useful tool: it captures temperature differences on the surface. It doesn't see inside the wall and it doesn't photograph the leak.
A temperature difference may be related to moisture, but it can also have other causes, such as a thermal bridge or a hot-water pipe. Equally, a leak may leave no distinct thermal signature at the time of the inspection. A thermal image alone cannot prove either the presence or the absence of a leak. In our experience, a thermal camera on its own — even a professional one — never gives a reading certain enough for you to break things open safely.
A real example: the image alone does not explain the cause
Here is a real example from our work where the thermal image is not enough to reach a conclusion. In a hotel basement bathroom, the camera helps reveal the extent of the damp. Establishing the cause takes a combination of findings.

The fact that the thermal camera doesn't show anything doesn't mean there's no leak. It means more data is needed before you decide whether and where to break things open.
Open up and replace only what is needed
The aim is to keep openings and replacements to what is necessary, as far as possible. That's why at IVM the specialised engineer combines a professional thermal camera, moisture measurements, acoustic testing and other specialised professional non-invasive testing equipment, depending on the problem. They check whether the findings agree before proposing any work.
To have more ways of checking before a wall or floor is opened, we also use instruments of our own, which we developed with our know-how in the research and construction of scientific instruments. For you, this means more ways to check the problem before it's decided where and how much will be opened.
A sound diagnosis does not make every repair cheap or remove all uncertainty. It does give you a better basis for deciding which work makes sense.
Your plumber says to break it open. What do you do?
- Ask what evidence points to that particular spot. If they have identified the cause, you don't necessarily need IVM.
- If the cause is still uncertain, consider a specialist investigation first. The next step doesn't have to be a trial break-in.
- Discuss the findings and the proposed solution before approving work. Your plumber carries out the repair, with its scope and cost agreed between you.
To limit the extra cost of failed attempts, it helps to be advised by someone who isn't paid according to the size of the repair. We do not carry out repairs. Η αμοιβή μας δε μεγαλώνει επειδή χρειάζεται μεγαλύτερη επέμβαση. Άρα δεν έχουμε λόγο να βρούμε πρόβλημα που δεν υπάρχει, ούτε να καλύψουμε ανεπαρκή ή λάθος διάγνωση με εκτεταμένη επισκευή, που θα την πλήρωνες εσύ νομίζοντας ότι η δουλειά έγινε σωστά.
We find the cause; your plumber carries out the repair. Two complementary roles, with the decision in your hands.
Our fee and satisfaction guarantee
So that you know, before you break anything, what's wrong and which solution fits you, with a thorough non-invasive (non-destructive) check by a specialised engineer: the fee for water leak or damp detection is 410 € + VAT, with a customer satisfaction guarantee. That is: if for any reason your experience with IVM, from start to finish, didn't satisfy you, you ask for your money back, whenever you want (see our guarantee →). We explain the findings to you on the spot and discuss them together. We investigate one cause, wherever it takes us (what this means →). Your space stays as it was.
That's all for the visit. If there is an insurance policy, we contact its loss adjuster ourselves and send them whatever material they need to make use of the visit, at no extra charge. Only if you also want something in writing for your own reasons, which is optional, there is an extra fee: a technical report stamped by an engineer, 150 € + VAT, or an expert-witness report by a qualified engineer, 300 € + VAT (what each one includes →).
The fee applies from Voula to Kifisia, for homes up to 180 m². For business premises, homes over 180 m² and areas outside this zone, we start from the same fee and the specialised engineer will confirm it when they talk to you — before the appointment. What the fee includes, in detail →
Frequently asked questions
The thermal camera showed nothing. Does that mean there's no leak?
No. It shows surface temperatures, and a leak may not show up in them on the day of the check. Other checks are needed before you say «I don't have one» or «I'm breaking it open here».
What's the difference between a thermographic check and an investigation?
A thermal imaging survey provides thermal indications. An investigation combines the history of the problem with appropriate tests to assess the cause, the confidence in the conclusion and the next action.
Should I agree to opening up a wall without an explanation?
You can ask what supports the proposal, what remains uncertain and what will happen if the opening doesn't confirm the hypothesis. You don't have to be an engineer to ask for an answer you can understand.
Related: when the same contractor diagnoses and repairs the leak · 5 questions to ask before paying for leak detection · the right steps from diagnosis to repair
Our investigations cover both water leak detection and damp diagnosis.
Before you pay for the repair, find out what really needs repairing. Tell us what you see and what has already been checked, so we can discuss whether an investigation is needed.
Call 210 513 8501.

